Armourcoat Surface Finishes
Armourcoat Ltd
Morewood Close Sevenoaks Kent TN13 2HU
T: +44(0)1732 460 668 F: +44(0)1732 450 930
UK Company 1997888.
CITB Reg No: 3054641. UTR 5287000511

Armourcoat Building Specification Sheet BSS9652

Document Generated: 2021-01-27 23:38:00
Product TypePPX
Product RefPPX Cement Grey - 9652 (Cement Grey 9652 Smooth)
Product DescriptionPPX (Polished Plaster eXternal) is a low maintenance, durable exterior limestone render system that allows you to create stunning honed and textured stone-like finishes for both new build and renovation projects.
ManufacturerArmourcoat Ltd Unit 2-3a Morewood Close Sevenoaks Kent TN13 2HU UK
Manufacturer Telephone(+44) (0)1732 460 668
Product Location*


Colour ReferencesRGB ≅ #A4A49A         
LAB ≅ 67.12,-1.14,5.05
Light Reflectance Value ≅ 36.785
PreparationPlease contact Armourcoat for preparation details
PrimerPlease contact Armourcoat for primer details
ThicknessPlease contact Armourcoat for further details
Day JointsPlease contact Armourcoat for further details
TemperatureProducts to be applied in temperatures 10 degrees Celsius and rising, n/e 30 degrees Celsius unless through consultation with manufacturer.
Guarantee10 year guarantee for internal use. The current warranty document can be found at
Genuine ArmourcoatThe system is to be supplied and where specified, applied by Armourcoat Ltd. No substitutes within the system are supported or allowed.
Primary ComponentPPX-TOPCOAT-WHITE White Exterior Polished Plaster Topcoat

Technical Information for PPX-TOPCOAT-WHITE White Exterior Polished Plaster Topcoat
ASTM D3960 VOC Test (g/l)0.0000
Recycled Content Pctg57.0000
Natural Mineral Content Percentage77.0000
Reaction to fireB - s1, d0
Bond Strength - ControlPass
Hygrothermal PerformancePass
Impact Resistance - WallCat. 2
Bond Strength - WallPass

Armourcoat products contain hand applied, natural mineral contents subject to pattern and tonal variation over and above those shown on samples. Product formulations may have changed since tests were conducted.

Base product test data to ASTM and BS standards not including substrate properties.

Whilst every attempt has been made to ensure the accuracy and reliability of the information contained in this document, the information should not be relied upon as a substitute for formal advice. Armourcoat Ltd, its employees and agents will not be liable for any loss or damage, of any kind, arising out of or in connection with the use of this document. Please refer to the company disclaimer for further details.