Primer: For surfaces with uneven suction apply Armourcoat K40 Primer
Thickness: 0.50 - 2.50mm Please contact Armourcoat for further details
Day Joints: Please contact Armourcoat for further details
Temperature: Products to be applied in temperatures 10 degrees Celsius and rising, n/e 30 degrees Celsius unless through consultation with manufacturer.
Guarantee: 10 year guarantee for internal use. The current warranty document can be found at www.armourcoat.com
Genuine Armourcoat: The system is to be supplied and where specified, applied by Armourcoat Ltd. No substitutes within the system are supported or allowed.
Primary Component: P70 Spatulata
Technical Information for P70 Spatulata
ASTM D6886-03 VOC Test (g/l): 74.0000
BSISO 11890 2 VOC Test (g/l): 74.0000
Recycled Content Pctg: 42.00
Natural Mineral Content Percentage: 93.00
Reaction to fire: A2 - s1, d0
EPA Method 24: 2.5000
Armourcoat products contain hand applied, natural mineral contents subject to pattern and tonal variation over and above those shown on samples. Product formulations may have changed since tests were conducted.
Base product test data to ASTM, EU and BS standards not including substrate properties.
Whilst every attempt has been made to ensure the accuracy and reliability of the information contained in this document, the information should not be relied upon as a substitute for formal advice. Armourcoat Ltd, its employees and agents will not be liable for any loss or damage, of any kind, arising out of or in connection with the use of this document. Please refer to the company disclaimer for further details.