Armourcoat Surface Finishes
Armourcoat Ltd
Morewood Close Sevenoaks Kent TN13 2HU
T: +44(0)1732 460 668 F: +44(0)1732 450 930
UK Company 1997888.
CITB Reg No: 3054641. UTR 5287000511

Armourcoat Building Specification Sheet BSS6027

Document Generated: 2019-03-21 00:16:40
Product TypeSculptural
Product RefElm
Product DescriptionA range of three dimensional, seamless sculptural wall surface designs constructed from a series of precast gypsum panels affixed and invisibly joined then decorated to suit.
ManufacturerArmourcoat Ltd Unit 2-3a Morewood Close Sevenoaks Kent TN13 2HU UK
Manufacturer Telephone(+44) (0)1732 460 668
Product Location*


PreparationPlease contact Armourcoat for preparation details
PrimerPlease contact Armourcoat for primer details
Thickness16.00 - 33.00mm Please contact Armourcoat for further details
Day JointsPlease contact Armourcoat for further details
TemperatureProducts to be applied in temperatures 10 degrees Celsius and rising, n/e 30 degrees Celsius unless through consultation with manufacturer.
Guarantee10 year guarantee for internal use. The current warranty document can be found at
Genuine ArmourcoatThe system is to be supplied and where specified, applied by Armourcoat Ltd. No substitutes within the system are supported or allowed.
Primary ComponentSCM09 Sculptural Casting

Technical Information for SCM09 Sculptural Casting
ASTM D3960 VOC Test (g/l)0.00
ASTM D6886-03 VOC Test (g/l)0.00
Contains Silica1
BS 476 Fire Test0
Recycled Content Pctg30.00
Substrate Specification Document NumberSSS11

Armourcoat products contain hand applied, natural mineral contents subject to pattern and tonal variation over and above those shown on samples. Product formulations may have changed since tests were conducted.

Base product test data to ASTM and BS standards not including substrate properties.

Whilst every attempt has been made to ensure the accuracy and reliability of the information contained in this document, the information should not be relied upon as a substitute for formal advice. Armourcoat Ltd, its employees and agents will not be liable for any loss or damage, of any kind, arising out of or in connection with the use of this document. Please refer to the company disclaimer for further details.