Armourcoat Surface Finishes
Armourcoat Ltd
Morewood Close Sevenoaks Kent TN13 2HU
T: +44(0)1732 460 668 F: +44(0)1732 450 930
UK Company 1997888.
CITB Reg No: 3054641. UTR 5287000511
www.armourcoat.com

Armourcoat Building Specification Sheet BSS5305

Details
Document Generated: 2018-04-23 08:48:22
Product TypeArmourColor
Product RefPLS Y2544 (PERLATA PLS Y2544)
Product DescriptionDecorative, water-based wall coatings offering seamless, hard wearing design alternatives to vinyl and wallpaper.
ManufacturerArmourcoat Ltd Unit 2-3a Morewood Close Sevenoaks Kent TN13 2HU UK
Manufacturer Telephone(+44) (0)1732 460 668
Manufacturer Emailestimating@armourcoat.co.uk
Product Location*

Drawings*

PreparationCoating will follow contour of substrate. Surfaces must be:
  • 1: sound and true with no hollows or bumps
  • 2: free of curing compounds, dust, and other impurities such as oil, grease and salts
  • 3: sealed with manufacturer’s recommended primer
  • 4: cleared of all fixtures and fittings
  • 5: within background tolerance ± 1mm in 600mm and ± 3mm in 1800mm
PrimerApply 1 or more coats of ArmourColor BaseColor Matt and allow to dry.
ApplicationApply 2 coats of pre-mixed ArmourColor Perlata and finish as required. Apply ArmourColor Clearseal Gloss a minimum of 4-8 hours later (recommended in heavy traffic and vulnerable locations to improve abrasion resistance).
Thickness0.10 - 0.30mm Please contact Armourcoat for further details
Day JointsUnless an expansion joint is advised by the substrate installer or structural engineer, the maximum area before the need for a day joint is 60 m2
TemperatureProducts to be applied in temperatures 10 degrees Celsius and rising, n/e 30 degrees Celsius unless through consultation with manufacturer.
Guarantee10 year guarantee for internal use. The current warranty document can be found at www.armourcoat.com
Genuine ArmourcoatThe system is to be supplied and applied by Armourcoat Ltd. No substitutes within the system are supported or allowed.
Primary ComponentPS Perlata Silver

Technical Information for PS Perlata Silver
ASTM D3960 VOC Test (g/l)209.0000
ASTM D6886-03 VOC Test (g/l)74.4000
BSISO 11890 2 VOC Test (g/l)63.0000
JIS A 1901 VOC Test (micrograms/m2/h)2.00
ASTM E84-03 Fire Test ResultA
BS 476 Fire Test0
Recycled Content Pctg25.00
ASTM D3274 Mould & Mildew Resistance Test10/10/10
ASTM D2486-06 Wet Scrub Cycles1075
French VOC LabelB

Armourcoat products contain hand applied, natural mineral contents subject to pattern and tonal variation over and above those shown on samples. Product formulations may have changed since tests were conducted.

Base product test data to ASTM and BS standards not including substrate properties.

Whilst every attempt has been made to ensure the accuracy and reliability of the information contained in this document, the information should not be relied upon as a substitute for formal advice. Armourcoat Ltd, its employees and agents will not be liable for any loss or damage, of any kind, arising out of or in connection with the use of this document. Please refer to the company disclaimer for further details.